Description
Recommended to use for external protection of concrete from atmospheric corrosive gases, wind driven rain and water born chlorides. It is recommended on concrete, cement, hardboard and brick surfaces of educational institutions, residential, commercial, industrial buildings, tunnels, bridges, parking buildings. Also it can be applied over textures.
✔️ Superior resistance to carbonization and corrosion
✔️ Permeability to water vapor (breathes without being affected)
✔️ Excellent protection for steel within concrete
✔️ High adhesion and excellent durability
✔️ Excellent resistance to weathering, water, and UV rays
✔️ Resistant to salts, moisture, and scratches
✔️ High color stability and a silky sheen
✔️ Antibacterial and odorless (very low VOC)
✔️ Spread rate: 9 m²/L.
🔧 Surface Preparation:
- Ensure the surface is dry (28 days for new concrete)
- Remove old coatings, oils, and dust
- Fill holes and cracks with a suitable putty such as “Techno Putty”
🖌️ Application:
- One coat of “Techno Exterior Primer”
- Two coats of “Techno Anticarbonation 910”
- Can be diluted with water depending on conditions
⏱️ Drying Time:
- Surface Dry: 30 minutes
- Complete Dry: 4 hours
- Repaint: After 8 hours
- Full Curing: 7 days
admin –
“I used it in the parking lot of a large mall. The results are excellent, even after two years.” – Eng. Abdullah Al-Zahrani, Jeddah
admin –
“It protected the walls from salts and moisture without compromising their aesthetics.” – Mr. Majed Al-Qahtani, Al-Khobar