Description
- Recommended to use as a sealer coat for exterior and interior applications on concrete and cement surfaces where excellent sealing and protection properties are required. It is also recommended as a prime coat for concrete and cement floors.
- Spread rate: 7 m²/L.
✔️ Excellent adhesion to concrete and cement surfaces
✔️ Seals pores and prevents moisture and chemical absorption
✔️ Highly resistant to salts and alkalis
✔️ Excellent resistance to water and harsh chemicals
✔️ Protection against scratches and abrasion
✔️ Superior hardness and long-lasting durability
✔️ Lead-free
🔧 Surface Preparation:
- Ensure the surface is clean, dry, and strong.
- Remove any old paint, oils, or salts.
- Light sanding or vacuum sanding is recommended to achieve a CSP2-3 level.
🖌️ Application Steps:
- Mix the base component with the hardener at a ratio of 2:1 until a uniform color is achieved.
- Use a short-pile (3/8-inch) epoxy roller or a stiff nylon brush for tight spaces.
- Do not apply unless the concrete moisture content is less than 4%.
⏱️ Drying Time:
- Completely dry within 8 hours.
- The next coat can be applied after 18 hours (maximum 7 days).
- ⚡ Note: The pot life of the mixture is approximately 45 minutes at 30°C. Do not use it after that.
admin –
“I had a problem with my floor paint cracking after a while, but with Techno Epoxy Sealer, the situation changed completely! Excellent adhesion and strong protection.” – Eng. Majed Al-Subaie, Riyadh
admin –
“I work in factory floor maintenance, and without exaggeration, this is the best epoxy sealer I’ve tried so far.” – Mr. Hassan Al-Omari, Jeddah