Description
A superior quality primer and undercoat paint based on modified alkyd resin. It is characterized by close pores and strong adhesion. It can be used directly as a primer on wood or intermediate coat on concrete and steelworks where smooth surface is required.
✔️ Closes pores and evens out the surface.
✔️ Excellent adhesion to walls and subsequent layers.
✔️ Free from formaldehyde, ammonia, and harmful substances.
✔️ Easy to apply and smooth with a light sandpaper.
✔️ Ready to use – no mixing or preparation.
✔️ Addresses minor imperfections and prepares the surface for finishing.
Recommended to use as putty for interior applications on concrete, cement and brick surfaces. it provides smooth surface after sanding.
🔧 Surface Preparation:
- Ensure the wall is clean and free of oil, old paint, or impurities.
- Wipe or wash the surface if necessary, and leave it in a slightly damp state before applying the primer.
- Put holes and cracks in a suitable sealant before applying the primer.
🖌️ Application:
- Apply a layer of Techno Interior Primer and allow it to dry.
- Apply the first coat of Techno Putty using a putty knife.
- After two hours, apply a second coat if necessary, and allow it to dry.
- Lightly sand the surface with 320-grit paper.
- Wipe away dust and begin the final paint application.
⏱️ Drying Time:
- Surface Dry: 30 minutes.
- Complete Dry: 2 hours.
- Ready for Painting: After at least two hours.
- Complete Dry: 7 days.
admin –
“The putty was so smooth that I didn’t need much sanding, and the finish was very clean.” – Mr. Bader Al-Mutairi, Riyadh
admin –
“Easy to use, even for inexperienced people, and the results are worth it.” – Ms. Sarah Al-Asiri, Jeddah